STONE PICKER

TS1500

Thyregod has many years of experience in developing and producing stone collectors. We build this experience, which has been created in close collaboration with our customers, into our new machines. The stone picker is hydraulically driven, which provides trouble-free driving and longer service life. The dual pump works on the basis of the tractor’s PTO (450-480 rpm). The stones are transported from the front chain over a wide front insert, which is made of 20 mm special steel.
thyregod stensamler steinsammler stone collector picker

Be seen on country roads

The machine is equipped with statutory traffic lights of the LED type and approved reflectors.

The models for France are equipped with statutory boards as seen in the picture.

The long elevator is built up in 3 sections and can be folded during transport (2460 mm). The lift is unfolded and unfolded via the control box from the tractor.

A really strong construction

TS1500 Stone Collectors are constructed in high quality steel from Swedish SSAB and are built to handle the tasks of hard tar worldwide.

The cleaning table which sorts the soil from the stones is made in 3 different versions with chain division of 28 – 36 – 40, where we recommend for potato part. 40 on the front and part. 36 to the rear.
The chain is also hydraulically drawn.
An upper chain (not shown in the picture) is fitted which acts as a safety chain that protects against stones flying around in the air, at the same time giving the chains a good visual view of what is happening on the cleaning table compared to if the machine was completely closed to .

thyregod stensamler steinsammler stone collector picker

Electrically hydraulically controlled

The TS1500 stone collector is fitted as standard with an electric hydraulic valve block for full remote control from the tractor.
The functions of the stone collector are controlled with a box in the tractor which is equipped with user-friendly joysticks and rocker buttons.
The stone collector has its very own oil tank and oil cooler.

The carrier on the elevator is divided in the middle and goes all the way to the side plates. It prevents stone jams on the elevator and wear on side plates. The support roller on the return side runs in the middle of the chain.

thyregod_product_stensamler_stein

High capacity

Where the stones have previously been torn together into strips, for example with our stone rake, a very high capacity is seen – up to 1 ton per minute.

The working depth of the stone collector can be steplessly adjusted via a spindle with handles and can be adjusted down to 300 mm

thyregod_product_stensamler_stein-sammler-stonepicker_web_2

Insertion roller

Thyregod stone collectors are provided with a spring-loaded feed roller 600 mm in diameter. The roller is hydraulically drawn. The roller causes a constant flow into the machine, where there is some plant growth in the field.

thyregod_product_stensamler_stein-sammler-stonepicker_web
Play Video